12
ENGLISH
Audio Settings
[EQ PRO]
Adjusts your own sound settings for each source.
• The settings are stored to
[USER]
in
[PRESET EQ]
.
[BASS ADJUST]
[BASS CTR FRQ]
[60]
/
[80]
/
[100]
/
[200]
: Selects the center
frequency.
[BASS LEVEL]
[–8]
to
[+8]
(
[+2]
): Adjusts the level.
[BASS Q FACTOR]
[1.00]
/
[1.25]
/
[1.50]
/
[2.00]
: Adjusts the quality
factor.
[BASS EXTEND]
[ON]
: Turns on the extended bass. ;
[OFF]
: Cancels.
[MID ADJUST]
[MID CTR FRQ]
[0.5KHZ]
/
[1.0KHZ]
/
[1.5KHZ]
/
[2.5KHZ]
: Selects
the center frequency.
[MID LEVEL]
[–8]
to
[+8]
(
[+1]
): Adjusts the level.
[MID Q FACTOR]
[0.75]
/
[1.00]
/
[1.25]
: Adjusts the quality factor.
[TRE ADJUST]
[TRE CTR FRQ]
[10.0KHZ]
/
[12.5KHZ]
/
[15.0KHZ]
/
[17.5KHZ]
:
Selects the center frequency.
[TRE LEVEL]
[–8]
to
[+8]
(
[+1]
): Adjusts the level.
[PRESET EQ]
[DRIVE EQ]
/
[TOP40]
/
[POWERFUL]
/
[ROCK]
/
[POPS]
/
[EASY]
/
[JAZZ]
/
[NATURAL]
/
[USER]
: Selects a preset equalizer suitable to the music
genre.
• Select
[USER]
to use the settings made in
[EQ PRO]
.
•
[DRIVE EQ]
is a preset equalizer that reduces noise outside the car or
running noise of the tyres.
[BASS BOOST]
[LV1]
/
[LV2]
/
[LV3]
: Selects your preferred bass boost level. ;
[OFF]
: Cancels.
[LOUDNESS]
[LV1]
/
[LV2]
: Selects your preferred low or high frequencies boost to
produce a well-balanced sound at low volume. ;
[OFF]
: Cancels.
[SUBWOOFER SET]
[ON]
: Turns on the subwoofer output. ;
[OFF]
: Cancels.
[LPF SUBWOOFER]
[THROUGH]
: All signals are sent to the subwoofer. ;
[85HZ]
/
[120HZ]
/
[160HZ]
: Audio signals with frequencies lower than 85 Hz/120 Hz/
160 Hz
are sent to the subwoofer.
[SUB-W PHASE]
[REVERSE]
(180°)/
[NORMAL]
(0°): Selects the phase of the subwoofer
output to be in line with the speaker output for optimum performance.
• Selectable only if a setting other than
[THROUGH]
is selected for
[LPF SUBWOOFER].
[FADER]
[R15]
to
[F15]
(
[0]
): Adjusts the front and rear speaker output balance.
[BALANCE]
[L15]
to
[R15]
(
[0]
): Adjusts the left and right speaker output balance.
[VOLUME OFFSET]
For AUX:
[–8]
to
[+8]
(
[0]
) ; For other sources:
[–8]
to
[0]
: Presets the
initial volume level of each source by comparing to the FM volume level.
(Before adjustment, select the source you want to adjust.)
[SOUND RECNSTR]
(Sound
reconstruction)
[ON]
: Creates realistic sound by compensating the high-frequency
components and restoring the rise-time of the waveform that are lost in
audio data compression. ;
[OFF]
: Cancels.
•
[SUB-W LEVEL]
/
[SUBWOOFER SET]
/
[LPF SUBWOOFER]
/
[SUB-W PHASE]
is selectable
only if
[SWITCH PREOUT]
is set to
[SUB-W]
. (Page 6)
•
[SUB-W LEVEL]
/
[LPF SUBWOOFER]
/
[SUB-W PHASE]
is selectable only if
[SUBWOOFER
SET]
is set to
[ON].
