ENGLISH
7
Radio
“ST” indicator lights up when receiving an FM stereo broadcast with
sufficient signal strength.
Search for a station
1
Press
B
SRC repeatedly to select TUNER.
2
Press
J
BAND repeatedly (or press #FM+/
*
AM– on the remote
control) to select the band FM1/FM2/FM3/AM.
3
Press
S
/
T
(or press
S
/
T
(+) on the remote control) to
search for a station.
You can change the searching method for
S
/
T
buttons when pressed.
Press
K
SEEK repeatedly to change the searching method.
•
AUTO1
: Automatically search for a station.
•
AUTO2
: Search for a preset station.
•
MANUAL
: Manually search for a station.
You can store up to 18 stations for FM and 6 stations for AM.
•
To store a station:
Press and hold one of the number buttons (1 to 6).
•
To select a stored station:
Press one of the number buttons (1 to 6) (or
press one of the number buttons (1 to 6) on the remote control).
Direct Access Tuning
(using the remote control)
1
Press DIRECT to enter Direct Access Tuning.
2
Press the number buttons to enter a station frequency.
3
Press ENT
IW
to search for a station.
• To cancel, press
or DIRECT.
• If no operation is done for 10 seconds after step 2, Direct Access Tuning is
automatically canceled.
Other settings
1
Press the volume knob to enter
[FUNCTION]
.
2
Turn the volume knob to select an item (see the following table), then
press the knob.
3
Repeat step 2 until the desired item is selected/activated.
4
Press and hold
to exit.
To return to the previous setting item, press
.
Default:
[XX]
[TUNER SETTING]
[AUTO MEMORY]
[YES]
: Automatically starts memorizing 6 stations with good reception. ;
[NO]
: Cancels.
• Selectable only if
[NORMAL]
is selected for
[PRESET
TYPE]
. (Page 6)
[MONO SET]
[ON]
: Improves the FM reception, but the stereo effect will be lost. ;
[OFF]
: Cancels.
