© Pan Acoustics GmbH
V 1.0
Page 8 of 24
Manual
8.2. Electrical connection
The low-impedance variant of the loudspeaker P 8-15-Pi is equipped with a 5-pin connector at the
back. The audio signal must be connected via the enclosed connection terminal using pin 1 (+) and
pin 2 (-). The connection terminal can also be used to pick up the audio signal again via pin 3 (+) and
pin 4 (-) on the loudspeaker.
8.2.1. P 8-15-Pi (low impedance)
Step 1:
Make the connection panel accessible. The
connection terminal can be fi rmly connected to
the loudspeaker enclosure using the screws in
the terminal.
Connection cables must not be used for fi xing or suspending loudspeakers.
WARNING
