© Pan Acoustics GmbH
V 1.0
Page 10 of 18
Manual
The low impedance variant of the loudspeaker P 04-RJ is equipped with an RJ45 socket with high
electrical and mechanical load capacity at the back. The contacts of the RJ45 socket are wired in
such a way that 4 wires of a network cable are combined for low-impedance signal transmission. This
connection variant permits to connect the loudspeaker to power amplifi ers with corresponding socket
and assignment using 23 AWG or 24 AWG network cables. Alternatively, an adapter cable is available
to operate the loudspeaker with DSP power amplifi ers that do not have an RJ45-compatible port.
The U-bracket can be swivelled from the centre
to the left and right by 110° each. To adjust the
set angle, hand-tighten the screws connecting
the U-bracket to the lids.
8.1.2. Angle of the U-bracket
8.2. Electrical connection
8.2.1. P 04-RJ (low impedance)
Step 1:
Make the connection panel accessible.
Connection cables must not be used for fi xing or suspending loudspeakers.
WARNING
To avoid damage to the product or to other IT
equipment, e.g. switches (PoE), the loudspeak-
er must not be connected to such devices.
CAUTION
