26 170311R2
Configuration set up
Plug 'n' drive support the configuration pre set-up tool to customize the various setup options.
1. PC Viewer
> Language
- Set up the language of the PC program.
> Unit of speed
- Set up the unit of the speed.
- Km/h, Mile/h
> AVI converter
- Set up the AVI conversion options.
- OUT Camera data only, IN Camera data only, IN&OUT Camera data
- Include the sound data or not.
> Saving location
- Set up the default saving location for the converted files by PC Viewer.
- The system preset default location is “PC Viewer” on the main window.
2. Plug 'n' drive
> Camera
- Select the Camera to be recorded.
- OUT or IN or Both
> Quality of video
- Select the quality level of video.
- Hi/Mid/Low
> Quality of audio
- Select the audio data.
- Audio ON/OFF
> Parking mode
- Select the Parking mode option.
- Continuous record, Motion detect watch mode.
> Time set of Parking mode
- Select the recording time of Parking mode.
- 2hrs, 4hrs, 8hrs.
> G-Sensor sensitivity
- Select the sensitivity of G-sensor
- The sensitivity level of the outer impact by the G-sensor. (1~10)
> Custom setting of GPS
- The customer can set the X,Y,Z value of the GPS.
> AV OUT
- Select the Camera to use the AV OUT port.
- OUT or IN Camera.
△
The continuous recording at the Parking mode is possible when the power cable is connected to the car fuse
box (emergency light).
3. Info.
> SD memory card information
- The information for the SD memory card..
> Version information
- The version of PC Viewer
- The version of Firmware
