12 170311R2
Routing Power Cable.
Please arrange the power cable by hiding between Sun-visor and A-filler’s rubber packing as below
picture shows.
Please note Plug 'n' Go Drive does not need to have the red and white wires connected for normal
operation, they are only used for continues backup power only.
Power cable can be hidden between Sun visor and filler rubber packing as shown below, or can be
hidden into roof of some vehicles.
Run the cable along the door coulomb after removing the seal as can be seen above and refer to
picture below.
Replace the seal securely ensuring cable is well hidden.
Run the cable behind the glove compartment or under the carpet ensuring the cable does pose any
tripping, tangling hazard or inadvertently blocking air bag deployment.
Excess cable should be securely hidden.
