9
CAUTIONS:
•
DO NOT attempt any type of service or repair on this amplifier without first removing the
AC power and allowing
AT LEAST 60 MINUTES FOR THE HIGH VOLTAGE CAPACI-
TORS TO BLEED OFF !
•
DO NOT operate this amplifier with the top or bottom covers removed. DO NOT operate
this amplifier with the internal RF tube compartment covers removed. Never place any ob-
jects into the top ventilation holes.
CONTACT WITH VOLTAGES IN THE CABINET
CAN BE FATAL ! CLOSE QUARTERS EXPOSURE TO UNSHIELDED RF AT THESE
POWER LEVELS IS HAZARDOUS TO YOUR HEALTH !
•
Never attempt operation without first connecting an appropriate antenna (2:1 VSWR Max)
or a 50 ohm dummy load with sufficient rating or
SERIOUS DAMAGE TO THE AMPLI-
FIER MAY RESULT.
•
Never operate the amplifier with more drive than required to produce the rated output for
the operating mode used.
•
Do not place the Commander II in repeater operation. This amplifier is not designed for un-
attended service. Extensive modification would be required for this type of service.
•
Never operate any amplifier using an extension cord.
•
Never cover the top of the amplifier cabinet with books, papers or other equipment as
OVERHEATING MAY RESULT.
IF ANY SITUATION YOU ARE NOT SURE ABOUT OCCURS,
PLEASE CONTACT MANUFACTURER FOR ASSISTANCE.
Telephone: 800-773-7931
Fax: 937-773-8003
E-mail: [email protected]
!! WARNING !!
CONTACT WITH VOLTAGES IN THIS AMPLIFIER CAN BE
!!! FATAL!!!
