Equipment Connection
RF connection
To watch a picture from the VCR using this connection, it is nec-
essary to set one of the TV channels as the "Video Channel"
See Preparations in “Video Channel Setting” (on Page 6).
1. Connect the antenna (or CATV) connector to the ANT.
IN socket.
2. Connect the coaxial cable (supplied) between the RF
OUT socket and the TV.
3. If you have a stereo receiver or amplifier, connect them
with an Audio cable (Not supplied).
4. Insert the power cord plug into the AC outlet.
NOTE
If you have tuned the VCR and TV set to different TV chan-
nels, you can only use the decoder for one of them.
When both the TV and VCR receive signals simultaneously
with the TV/VCR button switched to the TV mode, signal
interruption occurs.
When signal interruption appears on the TV screen, switch
the TV/VCR button to the VCR mode in order to view the
TV clearly.
AV connection
With this cable connection, many televisions automatically
switch to the “EXT” (external) or “AV” (Audio/Video)
programme number when a video cassette is played back.
You will find instructions for this in the operation manual of
your TV set.
1. Connect the antenna (or CATV) connector to the ANT.
IN socket.
2. Connect the coaxial cable (supplied) between the RF
OUT socket and the TV.
3. Insert the power cord plug into the AC outlet.
4. Connect the TV and the AUDIO/VIDEO socket with the
SCART cable (Not supplied).
E-5
