Entire programme
if VPS is set.
Auto Speed Adjust
Clearing the Data
If you are not sure if the tape is long enough for timer
programme recording at the SP tape speed, set the record-
ing tape speed to "A" (Auto) in step 6.
1. Press the TIMER button to release the timer standby
mode.
Recording starts at the SP tape speed and the VCR auto-
matically selects the tape speed to record the programme
to the end. If the tape length is not long enough, the tape
speed automatically changes from SP to LP
! NOTES
2. Press the OPERATE button to turn on the POWER.
3. Press the MENU button then press the SHIFT) button
to display the TIMER PROGRAM screen.
4. Press the CH V/ button to select the DATA SET LINE
to be cleared.
It is necessary to select the tape length beforehand on
theMODE screen. (See page 13)
When the LP tape speed is selected and the tape length
is not sufficient to record the programme to the end, the
programme cannot be completely recorded.
5. Press the SHIFT, then press RESET button to clear all
DATA.
When PDC/VPS is executing, Auto Speed Adjustment
does not work.
Notes on Timer Settings
Programme priority
Confirming the Data
While in the Standby mode
Press the MENU button to display the PROGRAM screen.
Press again to resume.
When two or more recording schedules overlap:
20:00
21:00
22:00
23:00
Program 1
Overlapped portion (not recorded)
Program 2
During EXECUTION
Press the MENU button to display the PROGRAM screen.
The programme being executed (DATA SET LINE) will
blink. Press again to resume.
When the start times for two or more recording sched-
ules are the same:
20:00
21:00
22:00
23:00
Program 2
! NOTES
If a power failure occurs or the power cord is unplugged,
the programmed data will be erased. (However, the pro-
grammed data will last for 30 minutes).
Reset the date and clock and re-programme the timer for
recording.
When a tape reaches its end (including OTR), the unit will
power off.
Select a recording speed using in CH V/ step 6.
When you select external input, Al is displayed for AU1
and A2 is displayed for AU2 on the timer program screen.
It is impossible to perform timer recording through AU3.
(Hi-Fi model only)
If you want to quit programmable timer recording during
execution, press the TIMER button.
E-16
.
.
.
.
.
V
.
.
.
.
Program 1
Overlapped portion
(not recorded)
.
.
V
