Setting Picture
20
Using the Preset Picture Mode
Press
MENU
to display the menu main page, if the
Video
menu page
doesn't appear, then push
ENTER
(Up/Down) repeatedly to display
Video
menu page.
Press
ENTER
to access.
The
Mode
item will be highlighted automatically.
Push
ENTER
(Left/Right) to select a desired picture mode.
Press
MENU
repeatedly to exit.
There are three preset picture modes [Vivid, Standard and Mild] and one user-set picture mode [Custom].
Each preset mode has its own picture settings.
[Vivid]: Select for a bright picture.
[Standard]: Select for a normal picture.
[Mild]: Select for a fine/soft picture.
You may directly use the
P.MODE
button on the remote control to select a desired picture mode.
Customising the Picture
Repeat steps 1~2 in [
Using the Preset Picture Mode
].
Push
ENTER
(Down) repeatedly to select the item you wish to
adjust.
Push
ENTER
(Left/Right) to adjust the value of the item.
Press
MENU
repeatedly to exit.
* The [Hue] item is for NTSC only.
Reducing Picture Noise
Repeat steps 1~2 in [
Using the Preset Picture Mode
].
Push
ENTER
(Down) repeatedly to select the DNR item.
Push
ENTER
(Left/Right) to select.
Press
MENU
repeatedly to exit.
Sometimes a noisy picture may appear on the screen because of poor signal. This function helps to enhance
the picture quality by reducing the noise.
Freezing picture
Press the
FREEZE
button to hold on the image on the screen (the video
sources still run). Press again to reactivate the image.
Note:
For the sake of protecting the screen, please do NOT freeze a picture for a long time.
1
2
3
4
1
3
4
2
1
3
4
2
Custom
70
30
45
0
50
Weak
Standard
On
1. Mode:
2. Contrast
3. Brightness
4. Colour
5. Hue
6. Sharpness
7. DNR:
8. Color Temperature:
9. APL:
Video
Custom
70
30
45
0
50
Weak
Standard
On
1. Mode:
2. Contrast
3. Brightness
4. Colour
5. Hue
6. Sharpness
7. DNR:
8. Color Temperature:
9. APL:
Video
Custom
70
30
45
0
50
Weak
Standard
On
1. Mode:
2. Contrast
3. Brightness
4. Colour
5. Hue
6. Sharpness
7. DNR:
8. Color Temperature:
9. APL:
Video
