Basic Operation
19
Select Input Source Signal
TV ------------------ select TV signal.
Video -------------- select signal from Video terminal.
S-Video ----------- select signal from S-Video terminal.
SCART1 ---------- select signal from 21-PIN SCART 1 interface.
SCART2 AV ----- select signal from 21-PIN SCART 2 interface.
SCART2 Y/C ---- select SCART 2 YC when viewing Y/C signal from 21-PIN SCART 2 interface.
YPbPr -------------
select signal from YPbPR or YCbCr terminals.
D-Sub ------------- select signal from D-Sub (I 5-pin D-sub) terminals.
HDMI -------------- select signal from HDMI/DVI terminals.
Press
SOURCE
to access source select menu.
Press
ENTER
(Up/Down) to select a desired signal source.
You may directly press the relevant number button to select a desired
signal source.
Press
ENTER
to confirm.
Note:
When you select to view program from
SCART2
and find the colour is not properly displayed, maybe the unit is
receiving
Y/C
signal. To properly display the picture's colour. please select
Scart2 Y/C
instead of
Scart2 AV
When using 21 pin Scart Converter to connect
SCART2
interface on the unit with your extended devices, please
select Scart 2 AV in source select menu.
3
2
1
1. TV
2. Video
3. S-Video
4. SCART 1
5. SCART 2 AV
6. SCART 2 Y/C
7. YPbPr
8. D-Sub
9. HDMI
Select Main Source
Adjusting the Volume
Using the volume buttons (/-)
Press the
or
VOLUME -
to increase or decrease the volume.
Muting the Sound
Using the MUTE button
At any time, you can temporarily turn off the sound using the
MUTE
button.
Press the
MUTE
button and the sound turns off.
To turn mute off, press the
MUTE
button again.
2
1
Changing Channels
Using the Channel Buttons (C/-)
Press the
C/-
to change channels.
When you press the
C/-
, the unit changes channels in sequence. You will see all the channels that the unit
has memorised.
You will not see channels that were skipped.
Direct Accessing Channels
Press the number buttons to go directly to a channel.
To select a one-digit channel:
Input the channel number by using the
0-9 number buttons
directly.
To select a two-digit channel:
Press -/-- to display "- -" and input the channel number by using the
0-9 number buttons
.
To select a three-digit channel:
Press -/-- to display "- - -"and input the channel number by using the
0-9 number buttons
.
Note:
When you use the number buttons, You may directly select channels that were skipped
.
Using the RETURN button
Press this button to switch between the current channel and the previous channel.
