background image

       

31

DVD Playback Operation                                         

 

This unit is designed with a disc slot so that you can playback the files on the disc.   

NOTES:  

—

 

Select DVD mode before insert disc. 

—

 

Use of poor quality discs could result in damage to the TV set. 

—

 

DVD players and discs are coded by region. These regional codes must match the played discs. If 
the codes don’t match, the disc cannot be played. This player’s default code is 

3

 

Basic Playback 

 

Start playback 

After the disc has been drawn into the disc tray, 

the playback will automatically start. 

—

 

Some discs do not start automatically. 

Press the 

 

button to start playback.   

—

 

Some discs may start playback with a menu. 

Use the direction buttons to select menu 

options and press the OK to start. You may 

also press the number buttons to select a 

menu option directly. Many discs will not 

allow this during start-up. 

Pause playback 

1.

 

During playback, press

 

the 

 button 

once to pause the playback 

2.

 

Press the 

 

button to resume normal 

playback.

 

 

Stop playback 

1.

 

During playback, press the 

 

STOP

 button 

once to stop playback. For some discs the 

player can recall the location where 

stopped, such as DVDs and CDs. 

2.

 

Press the 

 

button to resume playback 

from the location where playback was 

stopped.  

3.

 

Press the 

 

STOP

 button twice to stop 

completely. Play must then resume from 

the title beginning. 

Previous 

 and Next 

 

1.

 

During playback, pressing the 

 

button 

will restart the current chapter. 

2.

 

Pressing the 

 button twice to go to the 

previous chapter. 

3.

 

Each press of the 

 button during 

playback will skip the current chapter and 

play the next one. 

4.

 

In case of CD and JPEG discs the next track 

or photo is selected. 

Fast forward and Fast reverse 

1.

 

Press the 

 

button to fast forward 

through the disc. Each time the 

 button 

is pressed, the fast forward motion speed 

changes. 

2.

 

Press the 

 

button to fast reverse through 

the disc. Each time the 

 button is 

pressed, the fast reverse motion speed 

changes. 

3.

 

Press 

/OK to resume normal playback. 

D.REP 

For DVD disc, press the REPEAT button 

repeatedly, the repeat mode will be display as 

shown: chapter 

Æ

 title 

Æ

 all 

Æ

 off.   

For CD disc, press the D.REP button repeatedly, 

the repeat mode will be display as shown:   

single track 

Æ

 all tracks 

Æ

 off.   

For JPEG disc, press the D.REP button 

repeatedly, the repeat mode will be display as 

shown: Shuffle 

Æ

 Random 

Æ

 Single 

Æ

 Repeat 

One 

Æ

 Repeat All 

Æ

 Repeat Off. 

 

Summary of Contents for TFTV7450M







































Reviews: