21
TV Operation and System Setup
Record File Format
Select between TS and PS.
Partition Select
Select a disk to store the recorded file.
Press the
button to select
▲▼
Partition Select
and press the OK button to prompt a
sub-menu.
Press the
button to select desired disk and press
▲▼
OK to confirm. Also you can format
the selected storage device by press the red coloured button or set one of them as the
default partition. The available item varies depending on the external USB device
connected to the unit.
NOTES:
¾
We cannot guarantee compatibility (operation and/or bus power) with all USB mass
storage devices and assumes no responsibility for any loss of data that may occur
when connected to this unit.
¾
With large amounts of data, it may take longer for the system to read the contents of
a USB device. Unit may require longer time to format depending on the volume of
the USB device.
¾
Some USB devices may not be properly recognized.
¾
Even when they are in a supported format, some files may not play or display
depending on the content.
¾
Please make sure the USB device's file system is FAT32.
¾
USB device must be a high speed USB2.0 in order to operate properly.
Timeshift Buffer
Press the
button to select
▲▼
Timeshift Buffer
and press OK; then use the direction
buttons to select the desired setting.
Timer
Press the
button to select
▲▼
Timer
and press OK, all the scheduled timer will be listed.
In the timer list, you can:
Use the red coloured button to delete a timer.
Use the green coloured button to delete all the timers.
Use the yellow coloured button to add a new timer.
Use the blue coloured button to edit a timer.
Record List
Press the
button to select
▲▼
Record List
and press OK, all the record will be listed.
In the record list, you can:
Press the red coloured button to delete a timer.
Press the OK button to play the record.
