Installation
10
The PC input signal connection
Connect the VGA (D-Sub) signal terminal on the TV to the output of PC equipment through Min D-sub
15 pin cable as illustrated. Connect a cable, which matches the audio output terminal on the computer.
If you select PC signal, please set the input signal source of LCD-TV to
RGB
mode.
1. The native display resolution is 1280 768. If the signal resolution exceed the native
resolution, it may not be possible to show fine detail with sufficient clarity.
2. We strongly recommend that you set the vertical scanning frequency for PC signals
to 60Hz. If you set it above 60Hz the unit may not display correctly.
Equipment with
VGA output
Notes:
To VGA input
To audio input
To audio output
To VGA output
