background image

III

Handling the LCD screen 

•   Do not leave the LCD screen facing the sun as it can damage it. Take care when you    

place the TV by a window.

• 

      

  

  

Do not push or scratch the LCD screen .Do not place a heavy object on the LCD 

screen. This may cause the screen to lose conformity or cause LCD panel 

     malfunctions.

•   

 

If the TV is used in a cold place, a smear may appear on the screen. This is not a 

     malfunction. The screen will return to normal as its temperature rises to a normal 

     operating level.

•   If a still picture is displayed for a long time on the TV screen, ghosting may occur for a 

while. The ghosting will eventually disappear.

•   

 

If the LCD panel becomes warm during operation, this is normal and not a malfunction.

Handing of broken glass and liquid crystal leakage

If the LCD panel is damaged, crystalline liquid leakage may occur, or scattered broken 

glass may result. Do not touch broken glass or crystalline liquid (which is toxic). With bare 

hands that have cuts, skin irritation or poisoning may result. If any crystalline liquid gets 

into mouth or eyes, rinse thoroughly with and consult your doctor.

CAUTION:          

 

IF the set is not going to be used for a long period, such as during a  

                            vacation, unplug the set from the wall outlet to economise power.  

                            (If the TV set is plugged in, a slight current still flows, even with the 

                            power button in OFF position)

Handing of broken glass and liquid crystal leakage

IMPORTANT NOTICE

This product composes up to 6.0 million cells and a few cell defects may

occur In the manufacture of the panel. Several dead pixels (allow up to 2

bright or 2 dark pixels) on the panel are deemed acceptable by the industry

standards. In line with manufacturers and would not mean that the

panel is faulty. Dead pixels panels with 6 pixels or more within 12 month

period, Palsonic Corporation Pty Ltd. complies with industry standard

and reserves the right to repair the unit and non-refundable. We hope you

will understand that the product that corresponds to this standard is

regarded as acceptable.

Summary of Contents for TFTV4600FHD























Reviews: