background image

24. RED/GRE/YEL/CYN BUTTONS

These four colour-coded buttons control a memory that allows instant access to selected
page numbers.
The page numbers are chosen using the STORE procedure. To learn how to select page
numbers see under "TELETEXT PAGE NUMBER STORE" earlier in the Manual.
See also Button 7 (PR--) for LIST and FASTEXT mode information.

LISTENING TO STEREO/DUAL-CHANNEL TV SOUND

The Model 6738 is fitted with full performance Stereo Theatre Sound where the internal

speakers are ducted to the front of the set for maximum stereo effect. The Model 6738 is 

fitted with separate bass and treble controls available on the front panel and these should be

used to give the most enjoyable results tailored to your own taste in sound.

The audio response has been adjusted by the factory to give best results across a range of

movies and studio programs, but there will be some programs where the stereo effect is too

pronounced and may detract from the overall performance. This is particularly noticeable

no some outside broadcasts and movies, where sibilance in speech  is heard as lisping or

spitting on 'S' and 'T' sounds. In this case, the set should be switched back to MONO 

using the handset) when the lisping sound will be more acceptable. It is a characteristic of

stereo sound that such flaws in the broadcast system are much more audible.

Stereo on a good program adds a new dimension to sound, but it can also be annoying on

a bad movie or on an uncontrolled outside-broadcast. In this case, switch back to MONO

using the handset and the Stereo effect is removed. You have full control over the sound

with the bass and treble controls. Reducing bass and treble will give a better result on both

Stereo and Mono.

TRANSMISSION MODE INDICATION

Transmission Mode

Stereo

Forced Mono Selection

ON

ON

OFF

Dual Sound 

OFF

ON

SOUND MULTIPLEX SWITCHING
The TV station has the, option of transmitting Mono, Stereo, or Dual-channel sound. The
set detects the transmission automatically and allows the S. MPX button to make the correct
choices.

S. MPX Button (26)
The choice of sound is limited by what the TV station is sending. The possible choices are
shown below. Press the button and the choices available will be displayed on the screen in
turn.

STEREO

MONO

DUAL I

DUAL II 

Dual Sound Transmission Mode

Stereo Selection

Sound I Selection

Sound II Selection

OFF

OFF

ON

ON

ON

LED (Red)

sound II

sound I

LED (Yellow)

Stereo Sound Transmission Mode

15

Mono

.

.

.

Summary of Contents for MODEL 6738
























Reviews: