background image

20. DIGITAL KEYBOARD

In single-digit mode, press these buttons to select any of 0~9 channels.

In double-digit mode, press these buttons to select any of 00~39 channels.

25. BALANCE LEFT/RIGHT ( 

Press these two buttons to balance the Sound between left and right. The left button

reduces the volume of the right speaker; the right button reduces the volume of the left

speaker.

26. S. MPX (Stereo switching)

This TV set is fitted with full Stereo/Dual-channel Sound. Depending on what the TV

station is transmitting, the S. MPX button selects between Stereo/Mono, and Dual I

and Dual II channels. This also shows on the screen.

For a more detailed explanation, see "Listening to Stereo/Dual-channel TV Sound" in a

following section of the Manual.

TELETEXT FUNCTIONS

6. BROWSER (PR+)

With the set in Teletext mode (press button 15 first), press this button to select a Teletext

page at random. Whether this function works or not depends on the Teletext system.

Austext seems to ignore it.

7. PR- (LIST or FASTEXT)

In Teletext mode (press button 15 first), press this button to select LIST mode of 

FASTEXT mode. (This works with the colour-coded buttons-see below).

In LIST mode, the character "L" is displayed in the bottom left corner of the screen. You

can then select any of the four colour-coded buttons to select the stored page number. (For

information on how to change page numbers, see TELETEXT PAGE NUMBER STORE in

an earlier section).

In FASTEXT mode, the information on the four coloured buttons is set by the TV

station.

11. TIME/TEXT (

This sets the sub-page number in Teletext mode, for those pages which have multiple

subpages. The number is entered using the 0~9 keyboard when the screen shows

S * * * *.

For sub-page 3 of page 210 first enter "2" "1" "0" and then press TIME/TEXT to

show S * * * *. Then enter 0003 to fill in the numbers. The black & red display at the

foot of the page will now show 210 + 0003, indicating that Teletext will search for sub-

page 0003 of page 210 and will not display it on the screen until it finds it. If you enter

just "3" instead of "00003",  it does not work.

WARNING: If you enter the sub-page number of a page that does not have a sub-page,

then it never finds it! If you enter "3000" instead of "0003" Teletext will search for

page sub-page 3000, and never find it! Using the TIME/TEXT feature does not help

Teletext find the sub-page any sooner. It still has to wait until the page comes around.

12. PAGE UP/DOWN ( -

These buttons change the page selection one at a time up and down. It is a quicker way

than using the keypad when the page you want is nearby.

13

Summary of Contents for MODEL 6738
























Reviews: