Pay attention to set the aluminum corners (
A111
,
A112
) according to
the marks showing bottom and top.
Insert the screws from the outside, tighten nuts only 2-3 turns and leave loose.
NOTE
: The assembly of profile
A161
should be done simulataneously
with profile
A111
.
The other side of profile
A161
will be connected later.
NOTE
: The nuts are to be from the inside. Do not tighten them until
completion of the assembly, If not specifically stated otherwise, this
procedure applies to all cases where
screws and nuts
411
,
412
are to be used.
A111
A111
A161
412
411
411
412
411
412
411
from the inside
QTY
2
#A111
#A112
1
#A161
QTY
A161
3
