IMP OR T A NT
- A - Aluminum profiles and parts.
- P5XX – Polycarbonate panels.
- P3XX – Plastic parts.
- M – Metal parts.
- 4XX – Screws, nuts, disks, etc.
Please carefully read all notes, instructions & remarks, BEFORE STARTING THE ASSEMBLY of the greenhouse.
Sort the parts and check against the contents parts list.
Carry out the assembly steps in the order set out in the instructions.
Screws 411 are to be assembled from the outside and nuts 412 from the inside of the greenhouse.
Close screws and nuts (411 & 412), 2-3 turns only, do not fasten them until completion of the assembly,
if not specified otherwise.
Prefix of the parts reference in the assembly instructions:
The end of all profiles, pointed by an arrow, is always upward.
The oval hole in the crossbars A256 should always be assemble to the base of the greenhouse.
The front of the greenhouse is the wall including the door, and the back is the opposite wall.
Firmly connect the greenhouse to a leveled final position immediately after completion of the assembly.