PaloAlto Networks ION 1200 Hardware Reference Manual Download Page 29

Page: 29 / 64

ION 1200 Overview

ION 1200 LEDs

Refer to

ION 1200 Front Panel

ION 1200-C-NA/ROW Front Panel

and

ION 1200-C-5G-WW

Front Panel

for posion of the LEDs on the ION 1200 devices and its descripon.

LEDs

ION 1200

Power

• Green LED indicates the device is powered on.
• Red LED indicates that the device is not geng enough

power.

Operang System Status

• Green LED indicates OS is running.
• Red LED indicates secure boot has failed.

Controller

• Green LED indicates that the device is connected to the

controller.

• Red LED indicates the device is aempng to connect to

the controller.

Link Acvity

On ethernet ports, the right LED displays the link acvity. The

LED blinks when there is acvity detected on the link.

Link Speed

On ethernet ports, the le LED displays the link speed on the

port.
• Oﬀ—No link or speed is 10Mbps.
• Green—Link detected and speed is 100Mbps.
• Yellow—Link detected and speed is 1Gbps.

The following table describes the cellular LED.

Cellular LED

Cellular ION Device

Cellular

The device cellular LED indicates the signal strength.
• Oﬀ—No modem detected.

ION 1200 Hardware Reference

2021 Palo Alto Networks, Inc.

Summary of Contents for ION 1200

































































Search results

Summary of Contents for ION 1200

Reviews:

Related manuals for ION 1200

Brands by name

Popular brands

PaloAlto Networks ION 1200, Hardware Reference Manual

Search results

Summary of Contents for ION 1200

Reviews:

Related manuals for ION 1200

Brands by name

Popular brands