25
In the motor connection profile and 40x20 profile connection, the holes must catch up with
each other. For this, the motors must be moved with the help of the remote control.
Fasten 16mm snap ring to motor connector
Fasten 16mm snap ring to motor connector
1. To connect actuator to panels, you need to give energy to control box and press calibration
button.
2. Then you need to connect to remote control (Please check programming)
3. To allign holes of 40x20 profile and actuator profile, move actuators front or back by remote
control.
4. Fix bolts of profile to eachother.
4.3. Linear Actuator Connector– 40x20mm Profile connection
M12x50mm hexagonal bolt stainless steel
M10 Washer Stainless Steel
M12 washer Stainless-steel
M12x35mm hexagonal head bolt
M12 washer Stainless-steel
M12x35mm hexagonal head bolt
Summary of Contents for Skyroof Plus
