Hand Dryer
Operating Instructions and Parts Manual
Surface-mounted high speed hand dryer
Recommended mounting heights
- from bottom edge of dryer above finished floor (AFF)
Operation
No-touch operation.
Men
Woman
Children 4-7 years
Children 8-10 years
Children 11-13 years
Children 14-16 years
Handicapped
1270 mm
1194 mm
889 mm
991 mm
1092 mm
1194 mm
1016 mm
(50")
(47")
(35")
(39")
(43")
(47")
(40”)
Shake excess water from hands.
Place hands under the outlet to start operation.
Rub hands lightly and rapidly.
Stops automatically after hands are removed.
Cleaning and Maintenance
Periodic cleaning of the unit is recommended to ensure optimum performance.
Disconnect the electrical supply.
Remove the two cover-mounting screws.
Remove the cover.
Clean all dust lint from the interior of the dryer.
Do not flush with water.
Wipe the cover with a damp cloth and mild
cleaning solution. Do not Soak. Never use
abrasives to clean the cover.
Replace the cover. Do not over tighten the screws.
Warm air speed adjustment
1.
Switch off the power, loosen the cover screws and
remove the cover.
2.
Use small Philips head screwdriver or plastic flat blade
probe to turn VR shaft. Turn it gently c
lock-wise [CW]
to increase power to maximum (+)
reduce power as required(-)
.
,
[CCW] to
Item15
3.
Note that at minimum power the unit may not start if
low line Voltage condition exists.
Sensor range adjustment
1.The ranger is 4" to 9" [100 mm to 230 mm],
Standard 7" [180 mm ± 20 mm].
2.Clockwise: Lengthen the sensing range(+)
3.
Counterclockwise
:
Shorten the sensing range(-)
4.
DO NOT OVERTURN !
Range(+)
Range(-)
4
HandDryerSupply.com | 804-859-2498 | [email protected]
