Hand Dryer
Operating Instructions and Parts Manual
Surface-mounted high speed hand dryer
M
ot
or
W
it
h
T
her
m
al
S
w
it
ch
Th
er
m
ost
at
General safety information
This product is
intended for installation by a qualified
service person. Use 2.0 mm² (AWG NO.14)
solid conductor for wiring.
Disconnect power at
the service breaker before installing or
servicing. Full pole disconnection device
must be incorporated in the fixed wiring
in accordance with the wiring rules.
Failure to properly
ground unit could result in severe
electrical shock and/or death.
All units must be
supplied with a 3-wire service. The
ground wire must be connected to the
dryer's backplate.
N
OTE: We do not recommend installing this dryer above a basin. If you are installing
this dryer above a basin, please make sure that reflection won’t occur.
【
Type Y attachment
】
If the power supply cord is damaged, it must be replaced by the manufacturer
or its service agent or a qualified person in order to avoid a hazard. Disconnect
the fixed wiring only in accordance with the wiring rules.
This appliance is not intended for use by persons (including children) with
reduced physical, sensory or mental capabilities, or lack of experience and
knowledge, unless they have been given supervision or instruction concerning
use of the appliance by a person responsible for their safety.
Children should be supervised to ensure that they do not play with the appliance.
Circuit Diagram
MO2 HE2
Red (110-120~Vac)
Brown(220-240~Vac)
Black
Circuit Board Module
L N
Transistor
VR
Power Switch
1 2 3 4 5
SENSOR
MO1 HE1
N L
Black
White(110-120~Vac)
Blue(220-240~Vac)
2
G/Y
Blue
Bro
w
n
He
a
te
r
W
it
h
T
h
e
rm
o
-f
us
e
G
HandDryerSupply.com | 804-859-2498 | [email protected]
