Palm Tungsten Tungsten W, Getting Started

Page: 31 / 40

25
Troubleshooting
Turning on the handheld
This problem may occur during Step 2.
Problem: Handheld does not turn on.
If your handheld has been charged for at least two hours and it seems
not to turn on when you press the power button, try the following:
■
Press the Date Book application button or any other application
button to ensure your handheld is turned on.
■
Press Function and then Brightness . If the Brightness
dialog box appears, adjust the brightness by pressing and holding
Up on the navigator for a few seconds. If this doesn’t work, press
and hold Down on the navigator for a few seconds.
■
If your handheld was exposed to cold, make sure it is at room
temperature before you turn it on.
■
Perform a soft reset: Unscrew the top of your stylus to access the
reset tool (or use an unfolded paper clip or similar object
without a
sharp tip). Gently press the reset button inside the hole on the back
panel of your handheld.
Establishing a wireless connection
This problem may occur during Step 4.
Problem: Signal strength is weak.
Using the Signal Strength bar graph, monitor the signal strength while
you try the following solutions.
Reset button