Document #: 5100000 Revision: C
Page #: 13 of 20
5. FRAME AND DRIVE MOTOR
The frame of the mixing system houses the driving motor, motor positioner and control
box,
see Figure 2
(page 8).
Motor positioner allows an adjustment of the vertical
position of the motor by rotating the handle on the top of the positioner. The adjustable
position of the motor allows for usage of the retaining tanks with different heights.
6. ASSEMBLY PROCEDURE PRIOR TO MIXING
6.1
Introduce mixing bag into appropriate retaining tank and fill it with fluid by using the
appropriate tube line. Make sure that retaining tank is compatible with the bag volume.
6.2
Ensure that the two thumb screws do not penetrate beyond the inner surface of the
coupler. Assemble the coupler with the bag by sliding the coupler over the sleeve fitting
all the way down to the film of the bag (
see
Figure 9, below
).
6.3
Secure the coupler against the fitting by tightening both thumb screws.
6.4
The wand part number is stamped on its hexagonal head.
Use only specified
wand
. Insert rotational wand into the bushing, then insert the assembly into the sleeve
of the bag (
see
Figure 9, below
).
Summary of Contents for WandMixer RDUA003A
Page 19: ......
