background image

UR209

UR209 Series

s e r v i c e  

i n s t r u c t i o n s

Because of developments in technology these data or procedures may be subject to change. Consequently
we advise users to review their continuing validity annually. Part numbers quoted above are protected by the
Copyright of Pall Europe Limited.

, Pall and Ultipleat are trademarks of Pall Corporation. 

Filtration. Separation. Solution is a service mark of Pall Corporation.
® indicates a trademark registered in the USA.
© Copyright 2008, Pall Corporation.

May 2008. Printed in England. IMSIUR209

Visit us on the web at www.pall.com

Pall Corporation has offices and plants throughout the world in locations including:

Argentina, Australia, Austria, Belgium, Brazil, Canada, China, France, Germany, India, Indonesia,
Ireland, Italy, Japan, Korea, Malaysia, Mexico, the Netherlands, New Zealand, Norway, Poland,
Puerto Rico, Russia, Singapore, South Africa, Spain, Sweden, Switzerland, Taiwan, Thailand, 
United Arab Emirates, United Kingdom, United States, and Venezuela.  Distributors are located
in all major industrial areas of the world.

Pall Industrial Manufacturing

New York - 

USA

+1 888 333 7255

toll free

+1 516 484 3600

telephone

+1 516 484 6247

fax

Portsmouth - 

UK

+44 (0)23 9230 3303

telephone

+44 (0)23 9230 2507

fax

R E T U R N   L I N E   F I LT E R S

Summary of Contents for UR209 Series









Reviews: