Palit 945GC1066 Manual Download Page 27

Page: 27 / 31

BIOS Setup

Scroll to this item and press <Enter> to view the following screen:

Onboard Devices Controller (Press Enter)

Onboard IDE Controller (Enabled)

This item is to enable or disable the integrated IDE controller.

Onboard Devices Controller

Onboard IDE Controller
Onboard SATA Controller

USB Functions

Legacy USB Support

OnBoard Audio Controller
OnBoard LAN Controller
Onboard LAN Boot ROM

Item Help

F7:Previous Values F8:Fail-Safe Defaults F9:Optimized Defaults

: Move Enter: Select +/-/PU/PD:Value F10:Save ESC:Exit F1: General Help

mnlk

[Enabled]

[Enabled]
[Enabled]

[Enabled]
[Enabled]
[Disabled]

[Enabled]

Legacy USB Support (Enabled)

This setting must be enabled if the PC has a USB keyboard and the user wants to use this
keyboard either in a DOS environment or before the operating system loads

OnBoard LAN Controller (Enabled)

This lets you enable or disable the built-in network interface card.

USB Functions (Enabled)

This item is to enable or disable the support of USB interface devices.

OnBoard Audio Controller (Enabled)

This item is to enable or disable the built-in audio.

Enable or disable the
integrated IDE
controller

Onboard SATA Controller (Enabled)

This item is to enable or disable the integrated SATA controller.

Summary of Contents for 945GC1066
































Search results

Summary of Contents for 945GC1066

Reviews:

Related manuals for 945GC1066

Brands by name

Popular brands

Palit 945GC1066, Manual

Search results

Summary of Contents for 945GC1066

Reviews:

Related manuals for 945GC1066

Brands by name

Popular brands