Installing the Motherboard
10
FDD1: Floppy Disk Connector
First connect the single end to the onboard floppy connector, and then connect the remain-
ing plugs on the other end to the floppy drives correspondingly.
6. Install a Floppy Diskette Drive
The motherboard has a floppy diskette drive (FDD1) interface and ships with a diskette
drive ribbon cable (optional) that supports one or two floppy diskette drives.
You must orient the cable connector so that the pin 1 (color) edge of the
cable corresponds to the pin 1 of the I/O port connector.
Install Serial ATA Hard Drives
