!WARNING!
FAILURE TO FOLLOW THESE WARNINGS AND ASSEMBLY
INSTRUCTIONS COULD RESULT IN SERIOUS INJURY OR DEATH.
KEEP THESE INSTRUCTIONS FOR FUTURE USE.
BEFORE
each assembly inspect crib for damaged hardware, loose joints, missing parts
or sharp edges. Upon completion of assembly be sure all screws, bolts and fastening
devices have been tightened securely. A frequent check should be made during the use
of the crib to make sure all parts remain tight and secure.
DO NOT
use any crib if any parts are missing or broken.
DO NOT
substitute parts!
DO NOT
place crib near window where cords from blinds or drapes may strangle a child.
DO NOT
use a waterbed mattress.
DO NOT
leave child in crib with the side lowered. Be sure side is in raised and locked
position whenever child is in crib.
DO NOT
tie pacifiers, necklaces or any other items around a child's neck or on crib
parts. THIS COULD CAUSE STRANGULATION!
WHEN CHILD IS ABLE TO PULL INTO A STANDING POSITION lower the mattress to the
lowest position. Remove all bumper pads, large toys and other objects that could serve
as steps for climbing out. When child is able to climb out or reaches the height of 35
inches, the crib must no longer be used. The child should then be transferred to a youth
or regular bed.
If refinishing the crib, use only a non-toxic finish specified for children's products.
Never use plastic shopping bags or other plastic film as a mattress protector because
they can cause suffocation.
ANY MATTRESS USED IN THIS CRIB
MUST BE AT LEAST 27
1
/
4
", BY 51
5
/
8
"
WITH A THICKNESS NOT EXCEEDING 6".
(The dimensions shall be taken seam-to-seam or edge-to-edge where
appropriate.)
This crib conforms to the applicable regulations of the Consumer Product Safety Commission.
