Palfinger C1500L, Manual, Page: 35 / 435

32
Installing lifting mechanism
7.1.6 Installing the hydraulic unit (option)
The installation of your hydraulic unit depends on the selected type.
Three types are available:
• slide-in unit
• turning unit
• box unit
The hydraulic unit is normally premounted by PALFINGER Tail
Lifts . If request, you can also obtain a box unit with long cables and
hoses. You can then mount this box unit at any position at any
position under the vehicle. If the cables and hoses are too long, you
must bundle them and fix them under the vehicle.
7.1.7 Removing the installation aid

Remove the pins between the control rods and the installation
aids and carefully fold the control rods down.

Release the screw clamps with which the installation aids are
fixed to the vehicle chassis.

Remove the installation aids from the vehicle chassis.
ATTENTION
Risk of damage to components!
As there is still too little oil in the lift cylinders, the control rods can swing out
in an uncontrolled fashion, thus damaging the lifting mechanism.

Carefully fold down the control rods.