- 3.1 -
INSTALLATION
ENGLISH
3 HANDLING
AND
TRANSPORT
w
structure while the surround is in a separate package
suitable for long-distance transport. It is advisable to
be installed before unpacking it.
w
Pay attention to the stove’s tendency to oscillate.
Avoid sudden movements and sharp tugs when lifting
the stove.
Make sure the lifting capacity of the lift truck is more
than the weight of the stove. The person manoeuvring
the lifting means is held completely responsible for lifting
loads.
¢ ¡ !
polystyrene). Suffocation hazard!
w w{
points for handling with special equipment (Fig. 3.1).
4 TYPE OF FUEL
Termopalex models are to be fed preferably with
mature beech or birch wood or with wood briquettes.
Each type of wood has different characteristics that also
W ¢
It is forbidden to burn: pieces of bark, wood treated with
varnish, pressed wood panels, coal, plastic materials; in
this case, the guarantee on the appliance is no more valid.
Despite the User being responsible for verifying the
characteristics of the wood use, we must also specify that:
>
" ! $
it contains high quantities of resin substances that
¡¢W
>
IMPORTANT: burning wood types rich of aromatic
oils (e.g. eucalyptus, myrth, etc.) will cause the rapid
corrosion of the internal parts of the appliance.
Note that any damage to the product or its components
due to elements outside of such product is not covered
by the warranty and therefore no claims of this type can
be made to the manufacturer.
The declared nominal yield of the chimney is obtained by
burning the right quantity of wood, making sure not to
overload the combustion chamber. The ideal length of
the wood is provided by the length of the log holder.
The ideal length of the pieces of wood is of around 33
cm, which must be placed horizontally and not vertically.
Maximum allowable moisture content is 25%.
The reference standard for the fuel used is EN 14961-1
“Forest, plantation and other virgin wood”.
cod. 004772420 TMPX VC - 10/2013 - Palazzetti - PN - Italy
27/96
