background image

52 

 

004778610 - 16/12/2020

The ecomonoblocco is not a cooking appliance.
Store this instruction manual, which is an inte-

gral part of the appliance, for its entire service life. 

If the appliance is sold or transferred to another 

user, always make sure it is accompanied by the 

product booklet.
In case of loss, contact the manufacturer or au-

thorised retailer to receive another copy.

Maintenance

Maintenance operations must be carried out by 

qualified personnel authorised to work on the 

appliance to which this manual refers.

Responsibility for the works of installation

Responsibility for the works carried out for the in-

stallation of the appliance cannot be considered 

to be taken on by Palazzetti; it is and remains the 

responsibility of the installer, who is responsible 

for carrying out the checks relating to the flue, 

the air intake and how right the proposed instal-

lation solutions are.

1.7  Compliance

The appliances covered by this manual comply 

with the legislative provisions of the following 

European directives:

2014/30/EU:  Electromagnetic Compatibility 

Directive

2014/35/EU:  Low Voltage Directive
2011/65/EU, 2015/863/EU, 2017/2102/EU: 

RoHS Directive

2009/125/EC:  Eco-Design Requirements 

for Energy-Related Products 

Directive

REGULATION (EU) N. 305/2011 (CPR)
REGULATION (EU) 2015/1185 (ECODESIGN)

The following harmonised standards and/or reg-

ulations have been applied:

CPR:
- EN 13229:2001

1.8  Responsibility of the 

manufacturer

With the delivery of this manual, Pala-

zzetti declines all responsibility, both 

civil and criminal, direct or indirect, 

due to:

•  installation that does not comply with stand-

ards in force in the country and with safety 

directives;

•  partial or total non-compliance with the in-

structions contained in this manual;

•  installation by unqualified and/or untrained 

personnel;

•  use not in compliance with the safety direc-

tives;

•  modifications and/or repairs carried out on the 

appliance that are not authorised by the man-

ufacturer;;

•  lack of maintenance;
•  exceptional events.

Summary of Contents for Ecomonoblocco WT 16:3 3D













































































































































Reviews: