ITALIANO
ENGLISH
DEUTSCH
FRANÇAIS
ESPAÑOL
004778431 - 18/09/2020
19
1.12 Delivery of the appliance
The appliance is delivered perfectly packaged
and fixed to a wooden platform which allows
handling it using fork lift trucks and/or other
means.
The following material accompanies
the appliance:
• manual for use, installation and main-
tenance;
• product booklet;
• bar code label;
• protective glove;
• cold door opening handle for the MX
F models;
• hex key for the MX R and MX L models.
2 SAFETY WARnInG
2.1 Warnings for the user
Observe the prescriptions contained in this
manual.
Prepare the location where the ap-
pliance will be installed according to
the of local, national and European
regulations.
The appliance, being a heating prod-
uct, has particularly hot external sur-
faces. For this reason, we recommend
the utmost caution during operation;
in particular:
• do not touch and do not approach the
glass of the door, it could cause burns;
• do not touch any part of the chimney;
• do not perform any type of cleaning;
• do not offload the ashes;
• keep children out of reach.
Observe the prescriptions contained in this
manual.
Observe the instructions and warnings highlight-
ed by the pictograms displayed on the product.
The pictograms represent safety warnings and
must therefore always be perfectly legible. If
they are damaged and illegible it is necessary to
replace them, requesting the original spare part
from the manufacturer.
Use only the fuel complying with the indica-
tions given on the chapter relating to the fuel
characteristics.
Strictly follow the ordinary and extraordinary
maintenance program for the appliance and the
system.
Do not use the appliance in case of abnormal op-
eration, suspicion of breakage or unusual noises.
When cleaning do not lean on the open door: it
could cause the breaking of the door itself and/or
compromise the stability of the appliance.
Do not use the appliance as a support or anchor-
ing of any type.
Do not clean the appliance until the structure
and the ashes are completely cooled down.
Perform all operations in maximum safety and
calm.
In the event of a fire in the fireplace, try to extin-
guish the fire in the appliance by shutting off all
the combustion air using the adjustment handle.
Immediately call the emergency services.
Do not use the appliance as a waste incinerator
and use only the fuel recommended.
In case of appliance malfunction due to non-op-
timal forced draught of the flue, clean it accord-
ing to the procedure described in the paragraph
"Fireplace maintenance" on page 28 using
qualified personnel.
Cleaning of the flue must be carried out at least
once a year, or every 4 tonnes of wood burned.
Non-optimal forced draught of the flue can also
be caused by particularly adverse weather condi-
tions (typically low pressure or particularly windy
areas): in this case it is necessary to heat the flue
well, performing ignition correctly according to
the procedure described in the paragraph "Igni-
tion" on page 20.
Do not observe directly and for long time the
flame in order to avoid the occurrence of possible
eyes pathologies.
3 FUEl cHARAcTERISTIcS
The appliance should preferably be fuelled with
well-seasoned beech/birch wood. Each type of
wood has different characteristics that also affect
the combustion efficiency.
The use of conifers (pine-fir) is discour-
aged: they contain high quantities of
resinous substances that quickly clog
the flue.
