ITALIANO
ENGLISH
DEUTSCH
FRANÇAIS
ESPAÑOL
004778300 14/09/2020
33
Maintenance
Maintenance operations must be carried out by
qualified personnel authorized to work on the
appliance to which this manual refers.
Responsibility for the works of installation
Responsibility for the works carried out for the in
stallation of the appliance cannot be considered
to be taken on by Palazzetti; it is and remains the
responsibility of the installer, who is responsible
for carrying out the checks relating to the flue,
the air intake and how right the proposed instal
lation solutions are.
1.7 Main reference directives
The appliances, which this manual refers to,
comply with:
• the following directives:
2006/42/EC: Machinery Directive
2014/30/EU: Electromagnetic Compatibility
Directive
2014/35/EU: Low Voltage Directive
2011/65/EU: Directive on the Restriction of the
use of certain Hazardous Substances in Electri
cal and Electronic Equipment
• the following European regulations:
EU 2015/1189 (ECODESIGN)
EU 2015/1187 (ECOLABELLING)
EU 2015/1187
EU/1189
• and with the following harmonized standards:
EN 30352012: Regarding heating boilers Solid
fuel boilers, with manual and automatic feed
ing, with a nominal heat output of up to 500 kW
EN 610006 2
EN 610006 3
EN 603351
EN 603352 102
EN 62233
EN 50581
1.8 Responsibility of the
manufacturer
With the delivery of this manual, Palaz-
zetti declines all responsibility, both civil
and criminal, direct or indirect, due to:
• installation that does not comply with stand
ards in force in the country and with safety
directives;
• partial or total noncompliance with the in
structions contained in this manual;
• installation by unqualified and/or untrained
personnel;
• use not in compliance with the safety direc
tives;
• modifications and/or repairs carried out on the
appliance that are not authorised by the man
ufacturer;;
• lack of maintenance;
• exceptional events.
1.9 Technical assistance and
maintenance
Palazzetti has a dense network of service centres
with specialized, trained and skilled technicians.
The headquarters and our sales network is at your
disposal to direct you to the nearest authorized
service centre.
1.10 Spare parts
Use only genuine spare parts.
Do not wait until the components are worn by
use before proceeding replacing them.
Replacing a worn component before it breaks
help prevent injury due accidents occurring
when components break unexpectedly which
may cause serious harm to persons and property.
1.11 Serial identification plate
The serial identification plate (
A) is positioned
on the rear of the boiler (
Fig. 1) and shows all
the characteristic data relating to the appliance,
including the Manufacturer's data, the Serial
number and the brand
.
A
Fig. 1
