PALAZZANI RAGNO XTJ 43, Use And Maintenance Manual

Page: 39 / 191

Tel. 0039 030 6857073 - Fax 0039 030657079 info@palazzani.it - www.palazzani.it
Pag. 32 OM2010_GB
2.12. ENVIRONMENTAL CONDITIONS
2.12.1. Operating environment
The machine is designed to work both indoors and outdoors, thus subjected to normal
atmospheric phenomena.
The limits of use are:
Environment temperature: min -10°C max 40°C
Relative humidity: min 5% max 90% without condensate
Altitude: 2000 m
Max wind speed: 12,5 m/s (45 km/h)
Floor vibrations: none
The use of the machine, of their control systems and equipment operated under different
conditions than those listed is not allowed.
In particular, in the working environment, there haven’t to be:
• Exposure to corrosive fumes;
• Exposure to abrasive dust;
• Exposure to explosive mixtures of dust or gas;
• Exposure to salted air;
• Exposure to vibration, shock or abnormal shocks;
• Presence of nuclear radiation, ionizing.
WARNING
If the ambient temperature is below 5 ° C, before any movement, run the
engine for a few minutes.
Start moving the platform with small movements to heat up the hydraulic
oil.
DANGER
Before any movement, check that the safety limit switches and emergency
stop buttons are clean and free from snow or ice
WARNING
Protect the ground control panel from rain and snow. When the cage con-
trols are not used, especially in rainy days, keep the protective cover clo-
sed.