background image

Tel. 0039 030 6857073 - Fax 0039 030657079           [email protected] - www.palazzani.it

Pag.  16

OM2010_GB

2.2.  

PERSONNEL 

TRAINING

Operators need to be trained to the use and maintenance by qualifi ed personnel as indi-
cated in the agreement State Regions dated 22 February 2012.

!

ATTENTION

THE MACHINE IS FOR TO PROFESSIONAL USE EXCLUSIVELY

 

NOTE
THE RULES OF THIS MANUALS CAN NOT COVER PARTICU-
LAR SITUATIONS WHIC CAN OCCUR DURING THE DIFFE-
RENT INSTALLATION AND/OR FUNCTIONAL PHASES

ATTENTION

Do not perform any manoeuvre in case the reactions due to the controls are 
unknown.

 

ATTENTION

NEVER USE a damaged or modifi ed machine (in respect to the original 
confi guration).
In presence of damages or variations in respect to the original confi guration, 
inform inmediately the safety responsible about the noticed non-conformity.

 

ATTENTION

In case a plate or safety decal are worn, damaged or are not perfectly rea-
deable, inform inmediately the safety responsible, who will have to replace 
them inmediately.

 

SMOKE IS NOT ALLOWED
During the operations, the operator hands must be free from other and dan-
gerous objects, to be reactive in case of need.
For this reason, during the machine use smoke is not allowed

Summary of Contents for RAGNO XTJ 43
































































































































































































Reviews: