Palax C700 COMBI, Operating Instructions Manual

Page: 3 / 39

1-2018
II
I
translation
4.6 Disturbances during crosscut operation and their remedy............................. 18
5 Use of the firewood processor, splitting operation ................................................. 19
5.1 Splitting cylinder ............................................................................................. 19
5.2 An automatic high-speed valve is available as an option ............................... 19
5.3 Splitting wedges .............................................................................................. 19
5.4 Manual adjustment of the splitting wedge, Figure 15 .................................... 20
5.5 Hydraulic height adjustment of the splitting wedge Fig. 16, optional ........... 20
5.6 Adjusting the speed of the splitting wedge adjustment cylinder, Figure 17.... 20
5.7 Disturbances during the splitting operation and their remedy ....................... 20
5.8 Re-splitting the logs safely .............................................................................. 21
5.9 How the safety devices affect the operation of the machine, Figure 18 ......... 21
6 Operation of the splitting mechanism ..................................................................... 22
6.1 Solitting sensor, Fig. 19 .................................................................................. 22
6.2 Parts of the launch device (Figure 20) ........................................................... 22
6.3 Operational principle of launching ................................................................. 22
6.4 Hand-start of the splitting motion, Figure 21 ................................................. 23
6.5 Parts of the hydraulic valve (Figure 22) ......................................................... 23
6.6 Operation of the valve ..................................................................................... 23
7 Maintenance of the machine ................................................................................... 24
7.1 Crosscut saw-blade ......................................................................................... 24
7.1.1 Removing the crosscut saw-blade (Figures 23 and 24) ..................... 24
7.1.2 Sharpening the chain .......................................................................... 24
7.1.3 Stressing the saw-blade ...................................................................... 24
7.2 Guide for crosscut saw-blade (Figure 25) ...................................................... 25
7.2.1 Adjustment of the saw-blade guide ................................................... 25
7.3 Automatic tightening of the angular gear V-belts, Fig. 26 ............................. 25
7.4 Changing the V-belts, angular gear ................................................................ 25
7.5 Changing the oil in the angular gear .............................................................. 26
7.6 Lubricating the machine, Fig 28 ..................................................................... 26
7.7 Clutch for hydraulic pump, Fig. 29 ................................................................ 27
7.8 Changing the oil .............................................................................................. 27
7.9 Maintenance of the valve ................................................................................ 27
7.10 Detent end of valve .......................................................................................... 28
7.11 Lubricating the spool shifter, Fig. 33 ............................................................. 28
7.12 Structure of the detent end and the correct order of the parts, Fig. 34 .......... 28
7.13 Initial settings of the valve (Figures 35 and 36) ............................................. 29
7.14 Adjustment of launch bar clearance ............................................................... 30
7.15 Conveyor transmission, Fig. 37 ...................................................................... 30
7.16 Conveyor chains, Fig. 38 ................................................................................ 30
7.17 Cleaning the machine ...................................................................................... 30
7.18 Washing the machine ...................................................................................... 31
7.19 Storing the machine......................................................................................... 31