20
translation
5.4 Manual adjustment of the
splitting wedge, Figure 15
The machine is equipped with a manual
system for height-adjustment of the wedge.
The lever with friction plate A for stepless
adjustment keeps the wedge at the correct
height at all times.
The stiffness of the lever movement can be
adjusted by tightening the cup springs B of
the friction plate.
Note! Never use grease on the friction
plate.
5.5
Hydraulic height adjustment of
the splitting wedge Fig. 16,
optional
The splitting wedge may also be adjusted
hydraulically by means of the lever on the
crosscut deck.
For hydraulic adjustment a small side flow
is diverted from the main oil flow by means
of a flow regulation valve.
5.6 Adjusting the speed of the
splitting wedge adjustment
cylinder, Figure 17
A = Flow regulation valve
Adjustment
The speed of the adjustment cylinder is
increased by turning the valve A to the left.
NOTE!
Use as small a flow as possible
as the diverted oil flow is lacking from the
flow to the splitting cylinder.
A
14
B
15
Fig. 15. Manual adjustment of
the splitting wedge
15
16
Fig. 16. Hydraulic adjustment of
the splitting wedge
16
A
17
Fig. 17. Flow regulation of the
adjustment cylinder
5.7 Disturbances during the splitting operation and their remedy
A stuck log:
When the logs are big and have big branches, the force of the in-feed cylinder may
fall short.
If the tree sticks to the wedge, reverse the cylinder using the pedal.
Raise the splitting-wedge and retry the splitting using the manual control. Changing
the position of the log often helps.
Summary of Contents for C700 COMBI
Page 38: ...34 translation 10 ELECTRIC DIAGRAMS ...
Page 39: ...35 translation ...
