18
Option 4:the fabric goes up and down irregularly or the winch is excessively braked
Option 5:the terminal does not reach the correct position on the lower / upper position
Possible cause
Solution
Dirty inner side guides and/or zip
Contact the technician responsible for the installation
Zip exit from the inner guides
Contact the technician responsible for the installation
If there is strong wind
Wait until the wind diminishes
An obstacle blocks the run
Remove the obstacle
Possible cause
Solution
Adjustment loss of limit switches
Contact the technician responsible for the installation
Remote control memorisation loss (version with remote control
only)
Contact the technician responsible for the installation
Option 3: After pushing the buttons the motor emits a sound but the blind does not move / the winch
is not engaged or it is excessively braked
Possible cause
Solution
Unhooked or broken fabric
Contact the technician responsible for the installation
If there is strong wind
Wait until the wind diminishes
Dirty inner side guides and/or zip
Contact the technician responsible for the installation
An obstacle blocks the run
Remove the obstacle
The terminal cannot perform the proper unhooking procedure
from the Quick Lock (for Quick Lock version only)
Press hard on the terminal downwards (eventually using your
own body weight) and try to wind up the blind.
Contact the technician if the problem persists.
The blind has not been unlocked (for version with lock system
through latches only)
Push the two latches inwards
PALAGINA - USE AND MAINTENANCE
Summary of Contents for K.ZIP 55117/45
Page 2: ...PALAGINA MANUALE USO E MANUTENZIONE ...
Page 51: ...49 ...
