MR955512
9
WARNING! KNOW WHERE UTILITIES ARE
Observe overhead electrical and other utility lines. Be sure equipment will
clear them. When digging, call your local utilities for location of buried utility
lines, gas, water, and sewer, as well as any other hazard you may encounter.
WARNING! EXPOSURE TO RESPIRABLE CRYSTALLINE SILICA DUST
ALONG WITH OTHER HAZARDOUS DUSTS MAY CAUSE
SERIOUS OR FATAL RESPIRATORY DISEASE.
It is recommended to use dust suppression, dust collection and if necessary
personal protective equipment during the operation of any attachment that
may cause high levels of dust.
WARNING! REMOVE PAINT BEFORE WELDING OR HEATING
Hazardous fumes/dust can be generated when paint is heated by welding,
soldering or using a torch. Do all work outside or in a well ventilated area
and dispose of paint and solvent properly. Remove paint before welding or
heating.
When sanding or grinding paint, avoid breathing the dust. Wear an approved
respirator. If you use solvent or paint stripper, remove stripper with soap and
water before welding. Remove solvent or paint stripper containers and other
flammable material from area. Allow fumes to disperse at least 15 minutes
before welding or heating.
WARNING! END OF LIFE DISPOSAL
At the completion of the useful life of the unit, drain all fluids and dismantle
by separating the different materials (rubber, steel, plastic, etc.). Follow all
federal, state and local regulations for recycling and disposal of the fluid and
components.
EQUIPMENT SAFETY PRECAUTIONS
OPERATING THE ATTACHMENT
•
To avoid rolling over do not raise the attachment above five feet off the
ground or to a height where visibility is obstructed, whichever is lower.
• Do not lock the auxiliary hydraulics of your prime mover in the “ON” position.
• Keep everyone at least nine feet away from this product when operating.
• Do not exceed the lifting capacity of your prime mover.
• Operate only from the operator’s station.
• When operating on slopes, drive up and down, not across. Avoid steep
hillside operation, which could cause the prime mover to overturn.
• Reduce speed when driving over rough terrain, on a slope, or turning, to
avoid overturning the vehicle.
Summary of Contents for FFC PREPARATOR LAF3566
Page 2: ......
