MR05660
7
SAFETY SIGN & DECAL LOCATIONS
The diagram on this page shows the location of the decals used on the FFC Cold Planer.
The decals are identified by their part numbers, with reductions of the actual decals located on
the following page. Use this information to order replacements for lost or damaged decals. Be
sure to read all decals before operating the attachment. They contain information you need to
know for both safety and product longevity.
INSTRUCTIONS
• Keep all safety signs clean and legible.
• Replace all missing, illegible, or damaged safety signs.
• Replacement parts for parts with safety signs attached must also have safety signs
attached.
• Safety signs are available, free of charge, from your dealer or from FFC.
PLACEMENT OR REPLACEMENT OF SAFETY SIGNS
1. Clean the area of application with non-flammable solvent, and then wash the same area
with soap and water.
2.
Allow the surface to fully dry.
3.
Remove the backing from the safety sign, exposing the adhesive surface.
4.
Apply the safety sign to the position shown in the diagram above and smooth out any
bubbles.
1
6
4
2
7
5
3
50-10017
RDL3159
41043
50-0724
50-0721
RDL3100
RDL3179
