MR05660
12
OPERATION
Starting a Cut:
1.
To begin a cut, adjust the tilt and depth jacks
to the desired tilt depth with the planer slightly
above the ground. Engage the hydraulic
system to start the drum.
2.
Lower the planer bringing the rear planer
wheels onto the ground.
3.
Roll the planer into the cut, until the front
wheels of the planer are on the ground.
4.
Slightly lift the front loader wheels to create
a downward force on the planer. Slowly
move forward, planing in a straight line.
NOTE:
Materials can vary greatly: it is recommended that cutting depth be limited to 1 inch when
roughing concrete.
WARNING! Failure to obey the following procedures could result in death or serious
injury.
•
Never lift this product above (a) the operator’s eye level or (b) to a height
where visibility is obstructed, whichever is lower.
•
Never operate your Planer with the cover open.
