paladin FFC LAF3554, Manual

Page: 18 / 24

16
PREPARATOR ® PARTS LIST
LAF3554 LAF3566 LAF3576
ITEM QTY. 54” 66” 76” DESCRIPTION
1 1 LAF3590 LAF3501 LAF3502 Bucket
2 1 LAF3586 LAF3503 LAF3504 Shroud
3 1 LAF3591 LAF3505 LAF3506 Drum
4 1 LAF3507 Parallel Linkage Bar: Left
5 1 LAF3509 Rotor Drive Shaft (on left end of Drum)
6 1 LAF3510 Rotor Idler Shaft (on right end of Drum)
7 2 LAF3512 Taper Lock Adapter Assembly – Includes:
7A – Bearing Locknut: 1-3/4”
7B – Bearing Lock Washer: 1-3/4”
7C – Bearing Taper (male): 1-7/8” O.D.
8 2 LAF3513 Flange Mount Bearing: 1-3/4”/1-7/8” Taper Bore w/ Grease Zerk
9 1 LAF3514 Motor Shaft Spacer
10 1 LAF3516 Roller Chain: #80H x 59 Links
11 1 LAF3517 Connecting Link: #80H
12 1 LAF3518 Offset Connecting Link: #80H
13 1 LAF3530 Motor Mount
14 1 LAF3520 Roller Chain: #50H x 65 Links
15 1 LAF3521 Connecting Link: #50H
16 2 LAF3522 Offset Connecting Link: #50H
17 1 RHW1209 Grade 5 Hex Head Cap Screw: 3/8” x 1-1/2”
18 1 LAF3524 Rotor Drive Shield: Lower Cover
19 2 LAF3525 Brace Angle
20 1 LAF3526 Rotor Drive Shield: Lower Cover
21 1 LAF3532 Sprocket Bushing: 1-1/2” Quick Disconnect – Includes:
(1) Bushing: 1-1/2” I.D.
(3) Hex Head Cap Screws: ¼” x 1-3/8”
(3) Lock Washers: 1-4”
(1) Socket Set Screw: ¼” x 3/8”
22 2 LAF3533 Taper Lock Adapter Assembly – Includes:
22A – Bearing Locknut: 1-1/8”
22B – Bearing Lock Washer: 1-1/8”
22C – Bearing Taper (male): 1-1/4” O.D.
23 2 LAF3534 Flange Mount Bearing: 1-1/8”/1-1/4” Taper Bore w/ Grease Zerk
24 1 LAF3536 Sprocket: 17 Tooth #50 w/ 1” Bore and ¼” Key
25 1 LAF3537 Brush Drive Shield Gasket
26 1 LAF3540 Drive Sprocket Retainer: 13/32” I.D.
27 1 LAF3583 LAF3542 LAF3543 Brush: 13” Diameter
28 1 LAF3544 Sprocket: 26 Tooth #50 w/ 1-1/2” Bore and 3/8” Key
29 1 LAF3546 Sprocket: 12 Tooth #80 w/ 17 Tooth SAE Spline
31 1 LAF3549 Sprocket: 20 Tooth #80 w/ 17 Tooth SAE Spline
32 1 LAF3550 Brush Baffle Plate: Right
33 1 LAF3564 Brush Drive Shaft (on right end of Brush)
34 1 LAF3565 Brush Idler Shaft (on left end of Brush)
35 1 LAF3567 Sprocket Bushing: 1” Quick Disconnect – Includes:
(1) Bushing: 1” I.D.
(3) Hex Head Cap Screws: ¼” x 1-3/8”
(3) Lock Washers: ¼”
(1) Socket Set Screw: ¼” x 3/8”
37 1 RHW5970 Sprocket Spacer (use only as required to keep sprocket tight)
39 1 LAF3584 Brush Drive Shield
40 2 LAF3585 Rotor Mounting Plate
42 1 LAF3588 Brush Baffle Plate: Left
43 4 LAF3597 Skid Shoe Retainer
NOTE: All parts are the same as the
LAF3576
except for those parts numbered under the other models.