FURTHER INFORMATION: HTTP://WWW.PAKOLE.HU
AFR
- WATERFAN HEATER
Manual
9
4. Assembly
Prior to any installation procedures, take the following aspects into consideration: easy
access for maintenance works, access to water and electrical installation, appropriate air
distribution in a room.
*It is advisable to mount the device to the wall or the ceiling on original mounting brackets,
supporting mount pins (not delivered with the device) or supporting constructions (shapes
and dimensions of the supporting construction may be individually designed in complian-
ce with durability and strength requirements).
In case of mounting to the ceiling, pay attention to the fact that air-release/venting of the
device may be difficult so it is advisable to place vent at the highest point of the pipework.
The device may be mounted to the wall with the use of a mounting bracket at the angle of
0°, 30° or 60 °. A mounting bracket holder is made of curved profile. It has two holes for
vertical assembly. Assembly to the wall and/or to the ceiling is possible at different angles
but it requires making necessary holes in the holder.
