WX-1-O
User Guide Version 1.0
System Requirements
The minimum system requirements for the WX-1x are:
•
PC or MAC book compatible with an Ethernet interface
•
Operating system that supports an HTTP web browser
Hardware Installation
Note: the product is designed for specific application and must be professionally
installed by a qualified individual with RF and related knowledge.
WX-1-O Installation
1.
Place the unit in an appropriate place using the mounting kit.
2.
Run an Ethernet cable to the device and plug one end into the WX-1-O access point.
3.
Plug the other end of the Ethernet cable into a PoE+ injector or PoE+ Switch.
4.
The LED lights will begin to light up and indicate that WAP is connected.
5.
Once the WAP fully boots up, you may log into the WAP and configure the settings.
