Introduction
Thank you for purchasing the Pakedge
As the central component of your wireless
wireless AC networking. The WX-
can choose their preferred source of wireless internet
performance of the wireless network.
Each band (either 2.4 GHz or 5 GHz) of the
•
Access Point Mode
:
This is the typical configu
•
WDS Bridge Mode
:
This mode is
cannot use an Ethernet cable directly. Let’s say you have a desktop computer in an isolated
portion of an old home and can’t run a cable through the whole house to get internet to that
specific computer. When you put the
an access point in root access point mode and send it to a client device through an Ethernet
connection.
WX-1
Thank you for purchasing the Pakedge WX-1x
802.11ac Dual Band Access Point
.
As the central component of your wireless network, the WX-1x provides you with high
-1x broadcasts on both the 2.4 GHz and 5 GHz band so that select
can choose their preferred source of wireless internet, improving the overall stability, reli
performance of the wireless network.
GHz) of the WX-1x can operate in three modes:
This is the typical configuration for most Wi-Fi networks, as shown below.
This mode is used to send wireless internet to a hardwired device when you
cannot use an Ethernet cable directly. Let’s say you have a desktop computer in an isolated
portion of an old home and can’t run a cable through the whole house to get internet to that
When you put the WX-1x in bridge mode, it can receive a wireless signal from
an access point in root access point mode and send it to a client device through an Ethernet
1-O
User Guide Version 1.0
provides you with high-speed, high-range
band so that select devices
, improving the overall stability, reliability and
Fi networks, as shown below.
used to send wireless internet to a hardwired device when you
cannot use an Ethernet cable directly. Let’s say you have a desktop computer in an isolated
portion of an old home and can’t run a cable through the whole house to get internet to that
in bridge mode, it can receive a wireless signal from
an access point in root access point mode and send it to a client device through an Ethernet
