WK-WX Series User Guide
7
Reset to factory default settings
While setting up or troubleshooting, you may need to reboot the AP or restore it to
its factory default settings.
Caution: Do
not
power off the AP during a factory reset.
Reset using the interface
To only reboot the AP, maintaining all settings:
1.
Hover over the Maintenance menu, click Reboot, then click Reboot again.
To reset to factory default settings, deleting all user settings:
Caution: Performing this reset will delete all of your settings on the AP.
1.
Hover over the Maintenance menu, then click Configuration.
2.
Click Factory Default, then click Yes.
Reset using the physical RESET button
Your AP has a recessed RESET button accessible through a pinhole next to the
Kensington lock slot on the side of the AP.
To only reboot the AP, maintaining all settings:
1.
Insert a narrow, pointed object (such as a straightened paper clip) into the
hole.
2.
Press and release the button.
To reset to factory default settings, deleting all user settings:
Caution: Performing this reset will delete all of your settings on the AP.
1.
Insert a narrow, pointed object (such as a straightened paper clip) into the
hole.
2.
Press and hold the button for at least ten seconds, then release it.
