pakedge
device&software inc. /
SW24-GBP
14
pakedge
device&software
inc.
| 1163 Triton Drive | Foster City | California | 94404 | USA | 650.385.8700
Page
14
of
73
2.4.
Port Operation
The auto-negotiation feature allows the ports to run in one of the following operating modes:
Media
Speed
Wiring
10/100/1000Mbps copper
10Mbps
Category 3,4,5 UTP/STP
100Mbps
Category 5 UTP/STP
1000Mbps
Category 5,5e UTP/STP
1000Mbps Fiber
(Mini GBIC required)
1000Mbps
The fiber type will vary based on the GBIC type
you use. Please refer to your GBIC User Guide
2.4.1.
Configuring the Switch
The SW24-GBP can be configured and managed using a Web browser or command console. The
steps for logging in and configuring the switch through the Web-based GUI are explained below.
The section that follows gives instructions for configuring the switch using the command line
interface.
3.
Web-based Configuration:
Log in to the Web interface
The default values are:
IP Address: 192.168.1.201
Password: None
In order to log in to the SW24-GBP, you must first configure the TCP/IP settings of your PC/notebook.
Follow these steps:
1.
In the Windows Control Panel, double-click
Network Connections
and double-click the
connection of your Network Interface Card (NIC). The Local Area Connection Properties dialog
appears:
