C36
User Manual V1.2
4.
If you do not enable bandsteering, please make sure that your SSIDs have different settings.
Without bandsteering enabled, you cannot have an SSID on the 2.4 with the same exact settings
as an SSID on the 5 GHz.
5.
Once you have selected the number of SSIDs you want, you can configure the SSID name,
security, password, etc.
Advanced Settings in Global Configuration
Under the Advanced tab you will encounter two options.
802.11 Mode:
This will allow you to set the mode of the access points. By default, it is set to
B/G/N. This means that any wireless devices that support these modes will be allowed to connect.
You can set the mode to any of the following choices:
o
For 2.4 GHz
G/N (Default)
B/G/N
B/G
N
G
B
o
For 5 GHz
A/AC/N-Mixed
AC/N-Mixed
AC Only
N/A-Mixed
A-Only
