- 15 -
Ready for Operation
IM9500 / Printer Alignment
• Please Check the gap between the MF9500 body & printer. The interface guide should be
pushed into the mouth on the interface by no more than 25cm See [fig. 1].
• If required use a spirit level to make sure the surface the machines are located on is level.
! Once you have achieved this power up the machine and Press the “Reset” Button on the
OP panel. This will indicate that the interface guide is located correctly.
see fig.2
•
Also Connect the power for Printer and auto slide conveyor.
{Fig. 1}
{fig. 2}
installation
